China 6 Packs Rechargeable Led Road Flares Red

1.Supreme Led Road Flares Specification:

1.Led road flares with 16 LEDs
2.Waterproof to 50 feet
3.Corrosion proof & crush proof（withstand bening run by 10,000 pounds vehicles)
4.360 degree lighting coverage
5.High strength magnets (3000GS/PC) attach to metal surfaces
6.Rechargeable battery included, does not need to bereplaced
7.9 Flash patterns including S.O.S. Morse Code
8.Flares Dimensions: Diameter:10.5 Height: 3.5cm
9.Includes 120V wall charger, 12V car charger, USB charger
10.Operates in temperatures from -40C to + 60C and 100m underwater

2.Supreme Led Road Flares Advantages:

1.Safe and eco-friendly
2.No spark, open flame, fumes or toxic chemicals
3.16 super bright red LEDs are visible up to ½ mile
4.Lighting covers 360 degree direction
5.9 flashing patterns including SOS Rescue (Morse Code). Using high-capacity recahrgeable lithium battery as power, built-in IC chip control LED flash, this light has 9 user-selectable flash patterns.
6. Powerful magnet to attach to metal surfaces.The strong magnet attaches to construction or highway trucks, cars, signs, or other magnetic metal surface. The blinking caution light will alert drivers to road work, accidents, or other road hazards.
7. Shatterproof,crush proof, corrosion proof waterproof:

Housing made of PC, TPE and TPR, it is even no problem allowed a car drive over it!.

Completely waterproof! It even floats! Perfect for boats and watercraft safety, also it is no problem working underwater 1/2mile.
8. Safe to use in many HAZMAT situations. Ideal for personal vehicles, commercial vehicles, RVs, boats,road hazards, signal for help, mark detours, underwater scuba or repair applications and emergency responders.

9.Standard red LED is perfect for clear weather. In foggy conditions the yellow and blue LED provide superior visibility. Also blue, green and white LED is workable!

10.Powered by a high capacity CR123 lithium battery with a storage life up to 10 years. Store temperature from-40C to + 60C.

11. 120-240V wall charger and 12-24V car charger

LI battery in recharge series capacity: 700mAH/3.7V

AC charger: input voltage 100-240V, output voltage: 5.5V, output electricity 450MA

Car charger: input voltage 12-24V, output voltage: 5.5V, output electricity 450MA

Charging time: battery can be fully charged within 12-13hours.

12.How to Charge it?

1. Put the light on ground, back side is upturned.
2.Take out the ellipse charger, put the charger onto the light as photo shows below, there has a + and mark on both of light and charger, face + to + and to -.

3. Connect the USB wire with the ellipse charger, now you can charger the light through the computer USB plug.
4.If you want to charger the light through AC, please connect the AC charger.
5.If you want to charger the light through CAR Plug, take out the AC charger and connect the CAR charger instead.

When it is fully charging, the light on ellipse charger is GREEN, and when it is full charger, the light on ellipse will turn RED.

13.Flash Patterns and Running Time:

3.Supreme Led Road Flares Applications:

Led road flares is used to Identify road hazards, signal for help, mark detours,underwater scuba or repair applications. Ideal for emergency responders road safety identification by emergency responders and personal vehicle operators.May also be used on construction sites, for aviation marshaling and taxiing, event management, in marine applications for boater emergency safety or scuba.

When you need to alert others to a road hazard or are in need of light even during a heavy rain, the led power  flaresis a beacon that gets noticed. Because it is durable, functional in any weather condition, compliant with traffic and safety regulations, magnetic, and submersible to 50 feet, this red flashing light (also available in yellow/amber) has a million and one uses.

The led road flares has 9 different flashing patterns, with the 16 bright LEDs capable of being seen up to 1/2 mile. Choose from rotate, single blink, alternating blinks, quad flash, high steady light, low steady light, 2 LED flashlight, 4 LED flashlight, and S.O.S. Rescue Morse Code. Now that"s a safety flare that means business.

This LED road flares offers so many great benefits. Compared to other emergency flares, the led road flares excels in long-lasting durability. We"re talking a crush-proof and corrosion-proof polycarbonate plastic exterior and impact resistant rubber housing.

Here are some typical situations where the led road flares can be used:

On The Road:

As a emergency flares to slow down traffic or signal the need for traffic safety. An LED light makes a better road hazard marker than the flammable flares which are being banned by many states.

As a road construction flare to warn of road work, moving vehicles or other road hazards ahead. The amber safety light (red is also an order choice) is sure to get noticed by drivers.

As a detour beacon to signal a change in traffic conditions. It"s a detour flare that will keep traffic moving.

As a movable detour LED light or road hazard flare. The strong magnet attaches to construction or highway trucks, cars, signs, or other magnetic metal surface. The blinking caution light will alert drivers to road work, accidents, or other road hazards.

In any situation calling for a road hazard LED light. It"s strong and shock resistant and continues to operate even if cars or trucks drive over it.

On The Water:

These waterproof LED road flares float, making them suitable for a myriad of marine uses, including boater emergency safety. Place and anchor on top of the water to designate a work zone or prohibited area.

The underwater scuba flare can be used by divers to mark an exploration or worksite site, or as an emergency flare to signal for help.

As an underwater flashlight. The led emergency flare has nine different signal types, two of which serve as a LED flashlight.

Boaters equip their personal watercraft with the led emergency flare to use as an emergency LED light to signal for help.

On The Job:

For emergency responders, this led emergency flares is sure to slow or stop traffic. The led emergency flare is indispensable to police, firefighters, rescue personnel and others serving as emergency responders.

In the LED flashlight mode, police and firefighters can see better in dark or smoky areas.

As a police road flare when conducting traffic stops. The police LED light gets noticed and ensures traffic safety when in use.

As a military emergency flarez on or off the base. The military LED light can be used for safety, traffic control, or cautionary measures.

As a flashing road light for making repairs on the side of a road, sidewalk, or other public space.

The flashing red light also is ideal for any construction site, utility work area, or other indoor or outdoor worksite where a blinking traffic light would be beneficial.

For Personal Safety:

Whether driving a car, truck, boat or other vehicle, the led road flares is an ideal emergency signaling device. Its versatile design allows it to lie flat on any surface or on its edge to accommodate any emergency signaling need.

This led road  flares also complies with traffic and safety codes. For example, it meets the U.S. Department of Transportation, the Manual on Uniform Traffic Control Devices (MUTCD) and the National Fire Protection Association (NFPA) standards for traffic safety. And because no smoke vapors, ash, flames, or other harmful byproducts are created when in use, the LED road flares also meets tough state emission regulations, including California"s VOC emission guidelines.

Application:

Led road flares will bring you safe and secure and can be used as follows.

*The uses are limited only by your imagination. Customers who need a reliable, ultra-rugged, ultra-bright light can range from SCUBA divers, hikers, and cyclists .

*Search & rescue (SAR) operations: tag areas and items; personal safety light; emergency response teams

*Led road flares use as lantern in case of power failure, earthquake, hurricane or other disaster

*Attach as a safety light for bicycles and motorcycles

*SCUBA diving / boating and marine operations

*Work zone safety: mount on cones or barricades

*led road flares seen in the dark. Be bright at night on the road at a construction site or work site. Alert other workers or passers-by that you need help and are under duress when shouting does not help and want help from emergency services.

Led Road Flares is an ideal signal light to identify Road Hazards, Mark Detours, Underwater Repair Applications And More and A great item to keep in your vehicle at all times that can be used to signal for help or identify road hazards and used for police, firefighters, EMTs, rescue services, first responders, members of emergency response teams and the general public and used in cars, trucks, boats, RVs, semi-trucks, construction zones, and emergency response vehicles.